Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 124 / 560

moveboard(8)
100 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009
OPTIONS
The following options are supported:
-c assign
Disconnects a configured XSB from its domain configuration and
assigns it to the domain configuration of the move destination. If
the
-c
option is omitted, "
-c configure
" is used.
-c configure
Disconnects a configured XSB from its domain configuration and
configures it in the domain configuration of the move
destination. If the
-c
option is omitted, "
-c configure
" is used.
-c reserve
Reserves disconnection of an XSB from its current domain
configuration, and reserves assignment of the XSB to the domain
configuration of the move destination. If the
-c
option is omitted,
"
-c configure
" is used.
-d
domain_id Specifies the ID of the destination domain in which an XSB is to
be moved.
domain_id can be 0–23 depending on the system
configuration.
-f
Forcibly detaches the specified XSB.
Caution – If the
-f
option is used to forcibly remove the XSB
from the source domain, a serious problem may occur in a
process bound to CPU or process accessing a device. For this
reason, use of the
-f
option is not recommended in normal
operation. If the
-f
option must be specified, verify the statuses
of the source domain and job processes.
Note – The XSB which failed or detected the failure will not be
configured to the DCL forcibly.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-n
Automatically answers "
n
" (no) to all prompts.
-q
Suppresses all messages to stdout, including prompts.
-v
Specifies verbose output. If this option is specified with the
-q
option, the
-v
option is ignored.
-y
Automatically answers "
y
" (yes) to all prompts.