Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 343 / 560

showad(8)
System Administration 319
NAME
showad - show Active Directory configuration and messages
SYNOPSIS showad
showad cert [
-v
] [
-i
n ]
showad log [
-M
] [
-C
] [
-S
start_record_number ] [
-E
end_record_number ]
showad log
-f
showad group administrator [
-i
n ]
showad group operator [
-i
n ]
showad group custom [
-i
n ]
showad userdomain [
-i
n ]
showad dnslocatorquery [
-i
n ]
showad defaultrole
showad server [
-i
n ]
showad
-h
DESCRIPTION
showad
(8) displays Active Directory configuration and diagnostic messages.
Privileges You must have
useradm
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
-f
Displays diagnostic messages in real time. When this option is
used, the command does not terminate. Each diagnostic message
is displayed when it is registered. To stop the real-time display,
press
Ctrl-C
.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-i
n Sets an index marker, value 1 - 5. When executed without
-i,
or
with
-i
and no value,
showad
walks sequentially through items
1 through 5. Exceptions: When used without
-i
, the command
showad cert
displays the certificate information for the
Primary server, and
showad server
displays the Primary
server configuration.
-v
Specifies verbose output. Used only with the cert operand to
display the full certificate.