Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 189 / 560

setaudit(8)
System Administration 165
-g enable|disable
Sets the global user audit record generation policy.
When set to
disable
, no audit record which can be attributed to any user
account is generated. These settings can be overridden on an individual user
basis using the
-a
option.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
-m
mailaddr
Sets the mail address to which email is sent when the local audit storage space
usage reaches a threshold (see option
-t
). Email addresses must be a valid
email address of the form user@company.com. Specifying
none
for mailaddr
turns off email notification.
-p suspend|count
Sets the policy to follow when the audit trail becomes full. The following are
valid values:
suspend
All processes which try to write to audit records will be
suspended until either space becomes available and
records can be written, or the policy is changed to
count
.
count
New audit records are dropped and a count is kept of
how many records are dropped.
-t
percents
Sets thresholds at which to issue a warning about local audit storage usage.
percents is a comma-separated list of percentages of available space used. At
most four values may be set. For example, values of
50
,
75, 80, 90
would
cause warnings to be issued when 50%, 75%, 80% and 90% respectively, of the
available storage for audit records is consumed. The default value is 80%.
Warnings are issued as a message to the console and optionally to an
administrator using email. See
-m
mailaddr .