Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 354

Page: 354 / 560

showaudit(8)

330

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010

OPTIONS

The following options are supported:

-a

users

Displays the audit record generation policy for the specified users.

users

is a comma-separated list of valid user names.

-c

classes

Displays the audit record generation policy for the specified audit
classes.

classes

is a comma-separated list of audit classes. A class

may be specified by its numeric value or its name. The

ACS_

prefix

may be omitted. For example, the class of audit related events can
be expressed as

ACS_AUDIT

AUDIT

or 16.

The following are valid classes:

all

Denotes all classes.

ACS_SYSTEM(1)

System-related events

ACS_WRITE(2)

Commands that can modify a state

ACS_READ(4)

Commands that read a current state

ACS_LOGIN(8)

ACS_AUDIT(16)

Audit-related events

ACS_DOMAIN(32)

Domain management–related
events

ACS_USER(64)

User management–related events

ACS_PLATFORM(128)

Platform management–related
events

ACS_MODES(256)

Mode-related events

-e

events

Displays the audit record generation policy for the specified audit
events.

events

is a comma-separated list of audit events. An event

may be specified by its numeric value or its name. The

AEV_

prefix

may be omitted. For example, the event for

SSH

expressed as

AEV_LOGIN_SSH

LOGIN_SSH

, or

See

showaudit -e all

for a list of all valid events.

-g

Displays the global user audit record generation policy.

-h

Displays usage statement.

When used with other options or operands, an error occurs.

-m

Displays the address to which email is sent when the local audit
storage space usages reaches a threshold.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SPARC Enterprise M3000

Reviews:

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 354 / 560

Search results

Summary of Contents for SPARC Enterprise M3000

Reviews: