Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 362 / 560

showboards(8)
338 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised July 2010
Privileges
You must have one of the following privileges to run this command:
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
OPERANDS The following operand is supported:
EXAMPLES
EXAMPLE 1
Displays information on all mounted system boards.
platadm
,
platop
,
fieldeng
Can execute the command for all domains.
domainadm
,
domainmgr
,
domainop
Can execute the command only for accessible domains.
-a
Displays the state of XSBs configured in or assigned to a domain
and the state of all mounted XSBs.
-c sp
Displays the system boards located in the system board pool.
System boards in the system board pool do not belong to any
domain.
-d
domain_id Specifies the ID of the domain whose status of XSB is displayed.
Only information that is defined with the DCL of the specified
domain is displayed. An integer ranging from
0
to
23
can be
specified for domain_id , depending on the system configuration.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-v
Displays detailed information on XSB.
xsb Specifies the XSB number to be displayed. The following xsb
form is accepted:
x – y
where:
x An integer from
00
–
15
.
y An integer from
0
–
3
.
XSCF> showboards -a
XSB DID(LSB) Assignment Pwr Conn Conf Test Fault
---- -------- ----------- ---- ---- ---- ------- --------