Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 479 / 560

showntp(8)
System Administration 455
NAME
showntp - display the NTP information which currently set for XSCF
SYNOPSIS showntp {
-l
|
-a
| address |
-s
|
-m
}
showntp
-h
DESCRIPTION The
showntp
(8) command displays the NTP information currently set for XSCF.
The
showntp
(8) command can display the following information:
■
NTP servers which have been registered to the XSCF network
■
Status of synchronization with the NTP servers
■
Stratum value which has been set to XSCF
■
Designation of preferred server
■
The clock address of the local clock which is set in XSCF
Privileges You must have one of the following privileges to run this command:
useradm
,
platadm
,
platop
,
auditadm
,
auditop
,
domainadm
,
domainmgr
,
domainop
,
fieldeng
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:
-a
Displays all the NTP servers currently set for the XSCF network.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-l
Displays whether synchronization with an NTP server is being
maintained.
-m
Displays whether a preferred server has been designated
(
prefer
), and displays the clock address of the local clock
(
localaddr
).
In
prefer
, either of the following is displayed:
on
Preferred server has been designated.
off
Preferred server not designated.
In
localaddr
, the least significant byte of the clock address of
the local clock 127.127.0. x is displayed in a numeric from 0 to 3.
-s
Displays the stratum value which has been set to XSCF.