Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 513 / 560

showsunmc(8)
System Administration 489
NAME
showsunmc - show setup information and status of Sun Management Center agent
SYNOPSIS showsunmc [isenabled]
showsunmc [
-h
]
DESCRIPTION This command is used to show the setup information and current status of the Sun
Management Center agent. When used with the
isenabled
option, the
showsunmc
command output displays on the agent status:
1
if the agent is enabled,
0
if the agent is disabled.
OPTIONS The following options are supported.
Privileges You must have
platadm
,
platop
, or
fieldeng
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPERANDS There are no operands for this command.
EXAMPLES
EXAMPLE 1
Show the Status of the Agent: Not Set Up or Enabled
isenabled
Displays only the agent status. The value
1
indicates the agent is
enabled,
0
indicates the agent is disabled.
-h
Displays usage statement.
When used with other options or operands, an error occurs.
XSCF>
showsunmc
Agent Status: Disabled
Setup Status: Not set up
SunMC Server: unknown
Security Seed: maplesyr
SNMPv1 Community String: public
Agent Port: 1161
Host Trap Port: 162
Host Event Port: 163
SNMP Agent Port: 161
Domain Agent Ports: 1161