Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 87 / 560

flashupdate(8)
System Administration 63
NAME
flashupdate - update the firmware
SYNOPSIS flashupdate
-c check -m xcp -s
version
flashupdate [ [
-q
]
-{y|n}
]
-c update -m xcp -s
version
flashupdate
-c sync
flashupdate
-h
DESCRIPTION The
flashupdate
(8) command updates the firmware.
The entire firmware shown below is updated. Whether update can be performed
can be checked beforehand.
■
Update of the entire firmware (XSCF, OpenBoot PROM including Power-On Self-
Test (POST)) (
xcp
)
Privileges You must have
platadm
or
fieldeng
privileges to run this command.
Refer to
setprivileges
(8) for more information.
OPTIONS The following options are supported:.
-c check
Checks whether the specified firmware can be updated.
-c update
Updates the specified firmware. In the M8000/M9000 servers,
updates the firmware of both XSCF units.
-c sync
Synchronizes the firmware versions of the XSCF units in the
M8000/M9000 servers. This option is used when replacing an
XSCF unit.
-h
Displays usage statement. When used with other options or
operands, an error occurs.
-m xcp
Specifies the entire firmware as a target.
-n
Automatically answers "
n
" (no) to all prompts.