Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 274 / 560

setntp(8)
250 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
EXAMPLE 3
Adds the two NTP servers ntp1.examples.com and ntp2.example.com.
EXAMPLE 4
Deletes the first NTP server whose IP address is 192.168.1.2. This case is when
a NTP server is listed multiple times.
EXAMPLE 5
Sets the stratum value to 7.
EXAMPLE 6
Cancels the designation of preferred server of the NTP server.
EXAMPLE 7
Sets the clock address of the local clock of XSCF.
EXIT STATUS
The following exit values are returned:
SEE ALSO rebootxscf
(8)
, setnameserver
(8)
, showntp
(8)
XSCF>
setntp ntp1.example.com ntp2.example.com
Please reset the XSCF by rebootxscf to apply the ntp settings.
XSCF>
showntp -a
server 192.168.1.2
server 10.18.108.10
server 192.168.1.2
XSCF>
setntp -c del 192.168.1.2
XSCF> showntp -a
server 10.18.108.10
server 192.168.1.2
XSCF>
setntp -c stratum -i 7
Please reset the XSCF by rebootxscf to apply the ntp settings.
XSCF> setntp -m prefer=off
Please reset the XSCF by rebootxscf to apply the ntp settings.
XSCF>
setntp -m localaddr=3
Please reset the XSCF by rebootxscf to apply the ntp settings.
0
Successful completion.
>0
An error occurred.