manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 412 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 412

showenvironment(8)

388

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised November 2009

OPTIONS

The following options are supported:

OPERANDS

The following operand is supported:

EXTENDED

DESCRIPTION

The result displayed by using the 

power

 and 

air

 operands does not include the 

information of external I/O expansion unit and the peripheral I/O devices.

EXAMPLES

EXAMPLE 1

Displays the intake temperature and humidity of the system on the M8000/
M9000 servers.

EXAMPLE 2

Displays temperature information about the system and each component on 
the M8000 server. 

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

-M

Displays text by page. This option provides a function that is the 
same as that of the 

more

 command.

type

Specifies the one of the type of information to be displayed. The 
following types can be specified. If this type setting is omitted, 
intake temperature and humidity information about the system is 
displayed:

temp

Displays temperature information.

volt

Displays voltage information.

Fan

Displays fan speed information.

power

Displays power consumption information.

air

Displays the volume of air exhausted from 
the server.

XSCF> 

showenvironment

Temperature:30.71C

Humidity:90.05%

XSCF> 

showenvironment temp

Temperature:30.71C

CMU#0:30.71C

 CPUM#0-CHIP#0:30.71C

 CPUM#1-CHIP#0:30.71C

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments