manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 140 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 140

poweron(8)

116

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised August 2009

■

When the 

poweron

(8) command is executed, power-on results for each of the 

specified domains are displayed in the following format:

■

The 

showdomainstatus

(8) command can be used to check whether the power 

of each domain on the system is on.

EXAMPLES

EXAMPLE 1

Turns on power to all domains.

EXAMPLE 2

Turns on power to domains with domain IDs 0.

EXAMPLE 3

Turns on power to domains with domain IDs 0. Automatically replies with 

Powering on

The power was turned on normally.

Not Powering on

An error occurred, and the power could not be turned on. An 
error message is displayed with Not Powering on.

XSCF> 

poweron -a

DomainIDs to power on:00,01,02,03

Continue? [y|n]:

y

00:Powering on

01:Powering on

02:Powering on

03:Powering on

 

*Note*

 This command only issues the instruction to power-on.

 The result of the instruction can be checked by the "showlogs power".

XSCF> 

poweron -d 0

DomainIDs to power on:00

Continue? [y|n]:

y

00:Powering on

 

*Note*

 This command only issues the instruction to power-on.

 The result of the instruction can be checked by the "showlogs power".

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments