manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 347 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 347

showaltitude(8)

System Administration

323

NAME

showaltitude - display the altitude of the system and whether the air filter installed 

SYNOPSIS

showaltitude

showaltitude

 

-h

DESCRIPTION

The 

showaltitude

(8) command displays the current settings for the altitude of the 

system and whether the air filter installed.

Whether the air filter installed is displayed on the M4000/M5000 servers only.

The displayed altitude value is a multiple of 100 meters.

Privileges

You must have 

platadm

 or 

fieldeng

 privileges to run this command.

Refer to 

setprivileges

(8) for more information.

OPTIONS

The following option is supported:

EXTENDED

DESCRIPTION

■

The air filter is displayed only when it is installed. If the filter is not installed 
nothing is displayed.

■

The 

setaltitude

(8) command sets the altitude of the system and whether or 

not the air filter installed.

EXAMPLES

EXAMPLE 1

Displays the altitude of the system.

EXAMPLE 2

Displays the altitude of the M4000/M5000 servers with the air filter installed. 

EXIT STATUS

The following exit values are returned:

SEE ALSO

setaltitude

(8)

-h

Displays usage statement. 

XSCF> 

showaltitude

1000m

XSCF> 

showaltitude

1000m

Filter is installed.

0

Successful completion.

>0

An error occurred.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments