manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 225 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 225

setdualpowerfeed(8)

System Administration

201

NAME

setdualpowerfeed - set dual power feed mode 

SYNOPSIS

setdualpowerfeed

 

-s

 

 key

setdualpowerfeed

 

-h

DESCRIPTION

The 

setdualpowerfeed

(8) command specifies dual power feed mode in the 

system.

Note – 

The ability to enable and disable dual power feed is available on M3000/

M4000/M5000 servers only. However, dual power feed mode cannot be used with 
100V power on M4000/M5000 servers. When the optional power cabinet for dual 
power feed is connected on M8000/M9000 servers, it automatically configures dual 
power feed mode. For details about the setting of dual power feed, see the 

Installation Guide

 for your server.

To enable the dual power feed mode, you need to execute the 

rebootxscf

(8) 

command or turn off and on the input power. 

To disable the dual power feed mode, you need to turn off and on the input power. 

Privileges

You must have 

platadm

 or 

fieldeng

 privileges to run this command.

Refer to 

setprivileges

(8) for more information.

OPTIONS

The following options are supported:

EXTENDED

DESCRIPTION

The state of the current dual power feed mode can be checked by using the 

showdualpowerfeed

(8) command.

EXAMPLES

EXAMPLE 1

Disables dual power feed mode in the system. Before rebooting the system, a 
message is displayed.

-h

Displays usage statement. When used with other options or 
operands, an error occurs.

-s

 

key

Sets dual power feed mode in the system. Either of the following 
can be specified for 

key

:

enable

Enables the dual power feed mode.

disable

Disables dual power feed mode.

XSCF> 

setdualpowerfeed -s disable

enable -> disable

NOTE: Dual power feed will be disabled the next time the platform is powered 
on.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments