manualshive.com logo in svg

Fujitsu SPARC Enterprise M3000, Xscf Reference Manual, Page: 120 / 560

Share
Download
Fujitsu SPARC Enterprise M3000 Xscf Reference Manual Download Page 120

ioxadm(8)

96

SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010

The External I/O Expansion Unit chassis white LED has an integrated push button. 
The button can be used to toggle the state of the chassis white locator LED between 
off and fast. If the push button is used to turn off the locator LED, fast blink FRU 
service LEDs are cleared.

EXIT STATUS

The following exit values are returned:

IOX@X031      LOCATE      Fast          - LED 

XSCF> 

ioxadm env -1 iox@x031/ps1 SERVICE

 

Location      Sensor     Value Resolution Units

IOX@X031/PS1  SERVICE       On          - LED 

0

Successful completion.

>0

An error occurred.

Summary of Contents for SPARC Enterprise M3000

















































































































































































































































































































































































































































































































































































Reviews:

No comments