manualshive.com logo in svg

FujiFilm FUJI DRI-CHEM NX700, Instruction Manual

Share
Download
FujiFilm FUJI DRI-CHEM NX700 Instruction Manual Download Page 35

2-13

2 Part names and consumables

897N201058J FDC NX700 Instruction Manual 2022.04

2.5.2  Optional items

Name

Package/unit

Sample rack

For φ16×100 mm

1

For φ13×100 mm

1

For φ13×75 mm

1

For 1.5 mL

1

For 0.5 mL

1

For φ16×100 mm (when using PF)

1

For φ13×100 mm (when using PF)

1

For φ13×75 mm (when using PF)

1

* Slide cartridge

1

* Slide weight

1

Sample barcode reader

1

FUJI DRI-CHEM CLEAN TIPS

 *1

 (for manual sampling)  

6 cases

CAUTION:

The sample barcode reader specified for the FDC NX700 can be used.
Do not connect a barcode reader other than specified for the FDC NX700. Otherwise, physical 

damage or danger of fire may result.

NOTE

  Parts names marked with “*” are the same parts packed with the FDC NX700.

NOTE

  *1   Accessory: Extra facility to the analyzer which easily can be mounted by the user.

NOTE

  Specifications and capabilities are subject to change without notice.

2

Summary of Contents for FUJI DRI-CHEM NX700





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands