5-111
5.6 Printer Adjustment/Maintenance (05)
5
The laser optical unit air filter replacement history is
displayed.
[Selection]
[Setup and Maintenance]
→
[05 Printer Adjustment/
Maintenance]
→
[0552 Filter Replacement History]
[Replace] button: Click this button when the filter has
been replaced.
[Initialize] button: Click this button to initialize the
replacement history.
1. Click the [Close] button.
• Operation returns to the menu screen.
This procedure adjusts paper leading end position for
supply process on the basis of the sensors.
[Selection]
[Setup and Maintenance]
→
[05 Printer Adjustment/
Maintenance]
→
[0553 Feeding Position Sensor Fine
Adjustment]
NOTE: perform this procedure for both upper and lower
magazine decks.
1. Select “Upper” or “Lower” for “Magazine”.
2. Click the [Print] button.
• After about three minutes, adjustment Prints 1
and 2 are output.
3. Measure the feed length of Prints 1 and 2 and
record them.
4. Enter the recorded values in the “Measured”
boxes for “Print 1” and “Print 2”.
5. Click the [Calculate] button.
5.6.20
Filter Replacement History (0552)
5.6.21
Feeding Position Sensor Fine Adjustment (0553)
