5-30
5.3 Print Condition Setup and Check (02)
• The “Key Step Width/BL-SL” panel appears.
3) Set up the key step width and balance/slope.
<Key Step Width Setup>
C, M, Y: Normally enter “8”.
Dc, Dm, Dy: Normally enter “15”.
<BL/SL Setup>
Normally enter “0”.
Change setting only when the whole slope
condition is biased.
4) Click the “Sharpness/Grain Control” tab.
• The “Sharpness/Grain Control” panel
appears.
5) Select “Hyper-sharpness“ for “Sharpness
process”. Set up “Sharpness”, “Grain Control”
Process, “Sharpness Large-size Setup” and
“Minimizing Color Spreading”.
<Sharpness>
Sharpness Level: Low 3
Low 2
Low 1
Normal
High 1
High 2
High 3
Under Level:
–2
–1
0
(Sharpness can be set individually only for
under level.)
<Grain Control Process>
Grain Coarseness
Higher
Invisible
Normal
↑
Lower
Visible
<Sharpness Large-size Setup>
Sharpness can be set up individually for large-
size prints exceeding the magnification
entered in the “Magnification” box.
–2
–1
0
+1
+2
