manualshive.com logo in svg

Fortinet FortiRecorder 400D, Administration Manual

Share
Download
Fortinet FortiRecorder 400D Administration Manual Download Page 111

Page 111

Updating the firmware

Your new FortiRecorder appliance comes with the latest operating system (firmware) when 
shipped. However, if a new version has been released since your appliance was shipped, you 
should install it before you continue the installation. (Camera firmware can be updated later, 
after you have connected your cameras to the appliance. See 

“Upgrading/downgrading the 

camera firmware”

.)

Fortinet periodically releases FortiRecorder firmware updates to include enhancements and 
address issues. After you register your FortiRecorder appliance, FortiRecorder firmware is 
available for download at:

https://support.fortinet.com

 

New firmware can introduce new features which you must configure for the first time.

For late-breaking information specific to the firmware release version, see the Release Notes 
available with that release.

See also

•

Restoring firmware (“clean install”)

Installing NVR firmware

You can use either the web UI or the CLI to upgrade or downgrade the appliance’s operating 
system.

Firmware changes are either:

• an update to a newer version

• a reversion to an earlier version

To determine if you are updating or reverting the firmware, go to 

Monitor > System Status > 

Status 

and in the 

System Information

 widget, see the 

Firmware Version

 row. (Alternatively, in the 

CLI, enter the command 

get system status

.)

For example, if your current firmware version is:

FortiRecorder-200D v1.0,build0065,120821

changing to

FortiRecorder-200D v1.0,build0066,120824

In addition to major releases that contain new features, Fortinet releases patch releases that 
resolve specific issues without containing new features and/or changes to existing features. It is 
recommended to download and install patch releases as soon as they are available.

Before you can download firmware updates for your FortiRecorder appliance, you must first 
register your FortiRecorder appliance with Fortinet Technical Support. For details, go to 

https://support.fortinet.com/

 or contact Fortinet Technical Support. 

Summary of Contents for FortiRecorder 400D










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands