manualshive.com logo in svg

Fortinet FortiRecorder 400D, Administration Manual

Share
Download
Fortinet FortiRecorder 400D Administration Manual Download Page 24

NVR configuration

Page 24

FortiRecorder 2.4.2 Administration Guide

4.

Configure these settings:

Setting name

Description

Interface

Select the name of the network interface where this DHCP server will 
listen for requests from DHCP clients.

Gateway

Type the IP address that DHCP clients will use as their next-hop 
router.

On smaller networks, this is usually the same router that 
FortiRecorder uses. It could be your office’s router, or cable/DSL 
modem.

DNS options

Select either:

•

Default

 — Leave DHCP clients’ DNS settings at their default 

values.

•

Specify

 — Configure DHCP clients with the DNS servers that you 

specify in 

DNS server 1

 and 

DNS server 2

.

DNS server 1

Type the IP address of a DNS server that DHCP clients can use to 
resolve domain names. For performance reasons, if you have one, it 
is preferable to use a DNS server on your local network.

This setting is available only if 

DNS options

 is set to 

Specify

.

DNS server 2

Type the IP address of an alternative DNS server that DHCP clients 
can use to resolve domain names. For performance reasons, if you 
have one, it is preferable to use a DNS server on your local network.

This setting is available only if 

DNS options

 is set to 

Specify

.

Domain

Optional. Type the domain name, if any, that DHCP clients will use 
when resolving host names on the local domain.

Netmask

Type the subnet mask that DHCP clients will use in conjunction with 
the IP address that is assigned by FortiRecorder’s DHCP server.

Summary of Contents for FortiRecorder 400D










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands