manualshive.com logo in svg

Fortinet FortiRecorder 400D, Administration Manual

Share
Download
Fortinet FortiRecorder 400D Administration Manual Download Page 68

Page 68

Notifications

When a significant event happens, such as motion-triggered video recording or the hard disk 
being full, your FortiRecorder NVR can notify you, either by email or SMS messages. 

Notification configuration workflow

To configure the notifications, follow these steps:

1.

Configure the SMTP mail server settings so that FortiRecorder can send out notification 
email. See 

“Configuring FortiRecorder to send notification email”

.

2.

Configure the SMS server settings so that FortiRecorder can send out SMS messages. See 

“Configuring FortiRecorder to send SMS messages”

. 

3.

Configure the camera settings about what, when and to whom the notifications should be 
sent. See 

“Configuring cameras to send notifications”

. 

4.

Monitor the record of notification events by going to 

Monitor > Camera Notifications > 

Notification Events

. 

Configuring FortiRecorder to send notification email

For FortiRecorder to send email, you must specify an SMTP server to use. 

1.

Go to 

System > Configuration > Mail Server Settings

.

Summary of Contents for FortiRecorder 400D










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands