manualshive.com logo in svg

Fortinet FortiRecorder 400D, Administration Manual

Share
Download
Fortinet FortiRecorder 400D Administration Manual Download Page 117

Updating the firmware

Page 117

FortiRecorder 2.4.2 Administration Guide

Support

, that means the firmware is available to download from the Fortinet Technical 

Support web site. 

2.

Download the firmware file from the Fortinet Technical Support web site and save the file on 
your PC:

https://support.fortinet.com/

 

3.

Go to 

Camera > Configuration > Firmware

. 

4.

Click the 

Upload

 button to upload the downloaded firmware images. After the firmware is 

successfully uploaded, the 

Availability

 column will show 

Local

. 

5.

Go to 

Camera > Configuration > Camera

. 

6.

Select the camera that you want to upgrade/downgrade and click the 

Upgrade

 button. Note 

that you can select multiple cameras and upgrade/downgrade them at the same time. 

7.

From the available firmware list, select the firmware version you want to upgrade to and click 
OK. 

The camera installs the new firmware. During this time, the camera will not be able to record 
video if it was scheduled; you may notice a gap in the recorded video clips.

Summary of Contents for FortiRecorder 400D










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands