manualshive.com logo in svg

Fortinet FortiRecorder 400D, Administration Manual

Share
Download
Fortinet FortiRecorder 400D Administration Manual Download Page 7

Page 7

Key concepts

This chapter defines basic FortiRecorder concepts and terms.

If you are new to FortiRecorder, or new to digital video surveillance systems, this chapter can 
help you to quickly understand how to use your FortiRecorder system.

•

FortiRecorder NVR

•

Camera support

•

Deployment scenarios and camera discovery

•

Video clips

•

Performance guidelines

FortiRecorder NVR

The FortiRecorder network video recorder (NVR) provides central management for:

• configuring your cameras

• recording your video feeds

• viewing recordings and live video feeds

Camera support

The FortiRecorder NVR supports FortiCam series cameras from Fortinet and third-party 
ONVIF-compliant cameras, although some of the third-party camera features may not be fully 
supported. Therefore, you may want to configure those features through its built-in camera web 
interface. 

By default, every FortiRecorder or FortiRecorder-VM appliance supports one third-party 
camera. If you want to connect more than one, you must purchase licenses from Fortinet. For 
more information, please contact Fortinet or the resellers. 

Summary of Contents for FortiRecorder 400D










































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands