Notifications
Page 70
FortiRecorder 2.4.2 Administration Guide
3.
If the email server requires SMTP authentication (i.e. it uses the SMTP
AUTH
command), also
enable
Authentication Required
, then configure these settings:
4.
If you want to customize the FortiRecorder’s sender email address so that, for example,
replies are sent to the network administrators rather than the appliance, then configure these
settings:
Configuring FortiRecorder to send SMS messages
For FortiRecorder to send SMS messages, you must specify the SMS service providers.
1.
Go to
System > Configuration > SMS
.
2.
Configure the following:
Setting name
Description
User name
Type the name of the account, such as
jdoe
or
, that FortiRecorder will use to
log in to the SMTP server.
Password
Type the password for the account on the SMTP server.
Authentication type
Select one of the following authentication methods:
•
AUTO
— Automatically detect and use the most secure SMTP
authentication type supported by the email server.
•
PLAIN
— Provides an unencrypted, scrambled password.
•
LOGIN
— Provides an unencrypted, scrambled password.
•
DIGEST-MD5
— Provides an encrypted MD5 hash of the
password.
•
CRAM-MD5
— Provides an encrypted MD5 hash of the
password, with hash replay prevention, combined with a
challenge and response mechanism.
Setting name
Description
Sender display name
Type the display name, such as
Surveillance System
, that will
be displayed in the
From
field or column by email clients such as
Outlook and Thunderbird. Leaving this setting empty will cause
FortiRecorder to use the default value,
postmaster
.
Sender address
Type the sender email address (
From:
), such as
, that will appear in the SMTP
header. Leaving this setting empty will cause FortiRecorder to use
the default value,
.
Unlike the display name, depending on the client and its settings,
this may not be visible.
Setting name
Description
Service provider
Enter the SMS service provider name.
