Flexim FLUXUS G704, User Manual, Page: 29 / 257

UMG70XV3-4EN 12.01.2009 29
4 Flowmeter
Table 4.4: Input of text
positioning of the cursor
changes the currently selected character to an "A"
changes the currently selected character to a "Z"
changes between small and capital letters
selection of the precedent/next ASCII character
deletes the character and inserts a blank
...
scrolls automatically upwards/downwards through the restricted ASCII charac-
ter set. The character changes every second. The scrolling will be stopped by
pressing any other key.
ENTER finishes editing
Table 4.5: Cold start
BRK + C INIT (cold start): Most parameters and settings are reset to the factory default
values. Stored data will not be affected.
Keep the two keys pressed while switching on the flowmeter until the main
menu is displayed.
A cold start during operation is executed as follows:
• Press the keys BRK, C and ENTER simultaneously.
• Release only key ENTER. A RESET is executed.
• Keep the keys BRK and C pressed until the main menu is displayed.
- O
+
O
DISP
DISP
ON
O
OFF
O
%
N E X T
M U X