manualshive.com logo in svg

Flexim FLUXUS G704, User Manual, Page: 10 / 257

Share
Download
Flexim FLUXUS G704 User Manual Download Page 10

10

UMG70XV3-4EN 12.01.2009

1 Introduction

1.3

 Warranty

The FLUXUS flowmeter is guaranteed for the term and to the conditions specified in the
sales contract provided the equipment has been used for the purpose for which it has
been designed and operated according to the instructions given in this User Manual.
Misuse of the FLUXUS will immediately revoke any warranty given or implied. 
This includes:
• replacement of a component of FLUXUS by a component that was not authorized by

FLEXIM

• unsuitable or insufficient maintenance

• repair of FLUXUS by unauthorized personnel

FLEXIM assumes no responsibility for injury to the customer or third persons proximately
caused by the material owing to defects in the product which were not predictable or for
any indirect damages.
FLUXUS is a very reliable instrument. It is manufactured under strict quality control, us-
ing modern production techniques. If installed as recommended in an appropriate loca-
tion, used cautiously and taken care of conscientiously, no troubles should appear.
If any problem appears which can not be solved with the help of this manual (see chapter
19), contact our sales office giving a precise description of the problem. Specify the type,
serial number and firmware version of the flowmeter.

Summary of Contents for FLUXUS G704


































































































































































































































































Reviews:

No comments