Flexim FLUXUS G704, User Manual, Page: 222 / 257

222 UMG70XV3-4EN 12.01.2009
B Menu Structure
SYSTEM SETTINGS\PROC. OUTPUTS
selection of the displays for the setting of the
outputs of the flowmeter
selection of the output to be installed
SYSTEM SETTINGS\STORING
selection of the displays for storing of mea-
sured values in the data memory
setting of the overflow behavior of the data
memory x
selection of the sample mode
•
SAMPLE
: storing and online output of the
displayed measured value
•
AVERAGE
: storing and online output of the
average of all measured values of a stor-
age interval
x
setting of the storing behavior of the totalizers
•
ONE
: the totalizer value currently displayed
is stored
•
BOTH
: one value for each flow direction will
be stored
x
activation of storing of the signal amplitude
This value will be stored only if the data mem-
ory is activated. x
activation of storing of the sound velocity of
the medium
This value will be stored only if the data mem-
ory is activated. x
cold start
resistant
SYSTEM settings

Proc. outputs
Install Output

Current I1
SYSTEM settings

Storing
Ringbuffer
off >ON<
Storage mode
sample >AVERAGE<
Quantity Storage
one >BOTH<
Store Amplitude
off >ON<
Store c-Medium
off >ON<