Flexim FLUXUS G704, User Manual, Page: 135 / 257

UMG70XV3-4EN 12.01.2009 135
14 Libraries
Medium Properties
Enter for the medium:
• longitudinal sound velocity (in m/s)
• kinematic viscosity (in mm
2
/s)
• density (in kg/m
3
)
• gas compressibility factor.
One to five values depending on the selected function have to be entered. Press ENTER
after each input.
If an already defined medium is edited, for each property of some of the functions will be
requested whether to edit it. Select
YES
or
NO
. Press ENTER. Change the values if nec-
essary.
14.3.4 Input of Heat Flow Coefficients
Select
SPECIAL FUNCTION\INSTALL MEDIUM
. Press ENTER.
Select
YES
to store the entered properties or
NO
to quit the
menu item without storing. Press ENTER.
Note!
The heat flow coefficients can also be edited with the programs Flux-
Data and FluxKoef.
Note!
The entered coefficients will not be checked. Absurd values can re-
sult in wrong measured values or in permanent system errors.
Select the list item
HEAT-FLOW COEFFS
. Press ENTER.
An error message will be displayed if the coefficient mem-
ory does not contain space for heat flow coefficients.
Partition the coefficient memory (see section 14.1).
Select the medium for which the heat flow coefficients
have to be entered.
User defined media will be displayed first, followed by the
media of the internal database.
Select an index for storing the heat flow coefficients of the
selected medium. Press ENTER.
If the coefficient memory is partitioned so that heat flow co-
efficients for two media can be entered, indices 01 and 02
are available.
Save changes
no >YES<
Edit Medium

Heat-flow-coeffs
Heat-flow coeffs
NOT FORMATTED !
Heat-Coeffs for

BEER
Select index

02(--not used--)