Flexim FLUXUS G704, User Manual, Page: 120 / 257

120 UMG70XV3-4EN 12.01.2009
13 Storing and Output of Measured Values
13.2.3 Online Output
The measured values will be transmitted via the serial interface to a PC directly during
measurement. If the data memory is activated, the measured values will be stored addi-
tionally.
• Select the program branch
OUTPUT OPTIONS
. Press ENTER.
• Select the channel for which the online output is to be activated. Press ENTER until the
menu item
SERIAL OUTPUT
is displayed.
• Set the storage rate (see section 13.1.2).
The measuring point number will be requested when the measurement is started (see
section 13.1.3).
13.2.4 Offline Output
The measured values will be transmitted from the data memory of the flowmeter via the
serial interface:
• to a PC or by means of the program FluxData or
• to a terminal program in ASCII format
Offline Output by Means of the Program FluxData
settings at the flowmeter:
Further settings at the flowmeter are not necessary.
settings in the program FluxData:
• Open the program FluxData on the PC.
• Select the serial connection of the PC connected with the flowmeter (e.g. COM1 in Fig.
13.1).
• Open the menu FLUXUS in the program FluxData and select RECEIVE MEASURING
VALUES (see Fig. 13.2 and Fig. 13.3).
Select
YES
to activate the online output. Press ENTER.
Press BRK to select the main menu.
Serial Output
no >YES<
par mea opt >SF<
Special Function