manualshive.com logo in svg

Flexim FLUXUS G704, User Manual, Page: 138 / 257

Share
Download
Flexim FLUXUS G704 User Manual Download Page 138

138

UMG70XV3-4EN 12.01.2009

14 Libraries

14.5.3 Adding all Materials/Media to the Scroll List

14.5.4 Removing a Material/Medium from the Scroll List

14.5.5 Removing all Materials/Media from the Scroll List

Note!

The materials/media are displayed in the order in which they have
been added.

Select 

ADD ALL

. Press ENTER to add all materials/media

of the internal database to the current scroll list.

Select 

REMOVE

 

MATERIAL

 or 

REMOVE

 

MEDIUM

 to remove

a material/medium from the scroll list.

All materials/media of the current scroll list will be dis-
played in the lower line.
Select the material/medium. Press ENTER. The material/
medium will be removed from the scroll list.

Note!

User defined materials/media will always be displayed in the current
scroll lists. They can not be removed.

Select 

REMOVE ALL

. Press ENTER to remove all materi-

als/media from the current scroll list. User defined materi-
als/media will not be removed.

Material list

>Add all

Material list

>Remove Material

>Remove Materia

Stainless Steel

Material list

>Remove all

Summary of Contents for FLUXUS G704


































































































































































































































































Reviews:

No comments