Flexim FLUXUS G704, User Manual, Page: 148 / 257

148 UMG70XV3-4EN 12.01.2009
17 Inputs
17 Inputs
External transducers can be connected to the inputs (if available) to measure the follow-
ing physical quantities:
• temperature
• density
• pressure
• kinematic viscosity
• dynamic viscosity
The values of the current, voltage or temperature inputs can be used by all measuring
channels.
An input has to be linked to a measuring channel (see section 17.1 and 17.3) and has to
be activated (see section 17.4) before it can be used for the measurement or for storing
of measured values.
Depending on the configuration of the flowmeter, one or several of the following list items
will be displayed:
17.1 Linking the Temperature Inputs to the Measuring Channels
17.1.1 Linking the Temperature Inputs
Note!
If a new input is installed, the flowmeter has to be restarted (RESET)
to identify the new inputs.
Select
SPECIAL FUNCTION\SYSTEM SETTINGS\PROC.
INPUTS
.
Table 17.1: List items of the scroll list
PROC. INPUTS
list item function
LINK TEMPERATURE
linking temperature inputs to measuring channels
LINK OTHERS
linking other inputs to measuring channels
PT100/PT1000
selection of a temperature probe (FLUXUS G704)
...GO BACK
return to the precedent menu item
Select
SPECIAL FUNCTION\SYSTEM SETTINGS\PROC.
INPUTS
. Press ENTER.
Select the list item
LINK TEMPERATURE
.
SYSTEM settings

Proc. inputs
SYSTEM settings

Proc. inputs
Proc. inputs

Link temperature