Flexim FLUXUS G704, User Manual, Page: 136 / 257

136 UMG70XV3-4EN 12.01.2009
14 Libraries
14.3.5 Input of Steam and Concentration Coefficients
Use the program FluxKoef (option).
14.4 Deleting a User Defined Material/Medium
To delete a user defined material/medium, proceed as follows:
Select in the program branch
SPECIAL FUNCTION
the menu item
INSTALL MATERIAL
or
INSTALL MEDIUM
. Press ENTER.
If the extended library is activated, press ENTER until the request for deleting is dis-
played.
14.5 Arrangement of the Material/Medium Scroll List
The materials and media to be displayed in the program branch
PARAMETER
will be ar-
ranged in the material scroll list and in the medium scroll list.
Enter the 10 heat flow coefficients: a0...a4, r0...r4. Press
ENTER after each input.
Select
YES
to store the heat flow coefficients. Press EN-
TER.
Note!
The entered coefficients will not be checked. Absurd values can re-
sult in wrong measured values or in permanent system errors.
Select
DELETE
. Press ENTER.
Select the material/medium to be deleted. Press ENTER.
Select
YES
or
NO
. Press ENTER.
Note!
User defined materials/media will always be displayed in the scroll
lists of the program branch
PARAMETER
.
Select
SPECIAL FUNCTION\SYSTEM SETTINGS\LI-
BRARIES
. Press ENTER.
Heat-flow Coeffs
0.0 a0
Heat-flow Coeffs
Save? no >YES<
INSTALL MATERIAL
edit >DELETE<
USER MATERIAL
#01: Polystyrol
Really Delete
no >YES<
SYSTEM settings

Libraries