Flexim FLUXUS G704, User Manual, Page: 226 / 257

226 UMG70XV3-4EN 12.01.2009
B Menu Structure
input of the sound velocity of the material
range: 600...6553.5 m/s
input of the roughness of the material
INSTALL MATERIAL with SPECIAL FUNCTION\SYSTEM SET-
TINGS\LIBRARIES\EXTENDED LIBRARY = ON
selection of the function for the temperature
and pressure dependency of the material
properties
selection of a user defined material
confirmation that the properties of the select-
ed material are to be edited
This display will be indicated only if the se-
lected material already exists.
input of a designation for the selected materi-
al
input of the constants for the transversal
sound velocity of the material
The number of constants depends on the
function selected above.
input of the constants for the longitudinal
sound velocity of the material
The number of constants depends on the
function selected above.
selection of the sound wave type for the flow
measurement
cold start
resistant
c-Material
1590.0 m/s
Roughness
0.4 mm
Edit Material

Basics:Y=m*X +n
USER Material

#01:--not used--
USER MATERIAL 2
>EDIT< delete
#2: Input Name:
USER MATERIAL 2
T-SOUNDSP.
1500.0 m/s
L-SOUNDSP.
1500.0 m/s
Default soundsp.
long. >TRANS.<