manualshive.com logo in svg

Flexim FLUXUS G704, User Manual, Page: 146 / 257

Share
Download
Flexim FLUXUS G704 User Manual Download Page 146

146

UMG70XV3-4EN 12.01.2009

16 SuperUser-Mode

16

 SuperUser-Mode

The SuperUser mode allows experimental work. Features of the SuperUser mode are:
• Defaults will not be observed.
• There are no plausibility checks when parameters are being entered.
• There is no check whether the entered parameters are within the limit determined by

physical laws and technical data.

• The cut-off flow is not active.
• A value for the number of sound paths has to entered.
It is possible to change the lower limit of the inner pipe diameter for a given transducer
type without the activation of the Super User mode.

16.1  Activating/Deactivating

Press key C. Enter HotCode 071049 .

Press key C. Enter HotCode 071049 again to deactivate the SuperUser mode.

The SuperUser mode will be deactivated by switching off the flowmeter, too.

16.2  Transducer Parameters

In SuperUser mode, the menu item 

TRANSDUCER TYPE

 will be displayed at the end of

parameter input even if the transducers are detected by the flowmeter.

It is displayed that the SuperUser mode is activated. Press
ENTER. The main menu will be displayed.

It is displayed that the SuperUser mode is deactivated.
Press ENTER. The main menu will be displayed.

Press ENTER.
or

Select 

SPECIAL VERSION

 to edit the transducer parame-

ters. Press ENTER.

If 

SPECIAL VERSION

 is selected, the transducer parame-

ters have to be entered.
The transducer parameters have to be provided by the
transducer manufacturer. Press ENTER after each input.

SUPERUSER MODE

*IS ACTIVE NOW*

SUPERUSER MODE

IS PASSIVE NOW

Transducer Type

Q2E-314

Transducer Type

Special Version

Transd. Data

1

35.99

Summary of Contents for FLUXUS G704


































































































































































































































































Reviews:

No comments