Flexim FLUXUS G704, User Manual, Page: 218 / 257

218 UMG70XV3-4EN 12.01.2009
B Menu Structure
SYSTEM SETTINGS\DIALOGS/MENUS
selection of the displays for activation/deacti-
vation or setting of menu items in the other
program branches
activation of the menu item for the input of the
pipe circumference in the program branch
PARAMETER
x
activation of the menu item for the input of the
medium pressure in the program branch
PA-
RAMETER
This display is indicated only if
GAS-MEA-
SURING
in
SYSTEM SETTINGS\MEASUR-
ING
has been deactivated.
selection of the input mode for the measuring
point number in the program branch
MEA-
SURING
:
(1234)
: digits, point, hyphen
(

): ASCII editor
setting for the display for the input of the
transducer distance in the program branch
MEASURING
:
•
USER
: only the entered transducer distance
will be displayed if the recommended and
the entered transducer distances are iden-
tical
•
AUTO
: only the recommended transducer
distance will be displayed
recommended adjustment:
USER
activation of the menu item for the input of the
supply pressure in the program branch
PA-
RAMETER
for a heat flow measurement of a
liquid medium that can be liquid or vaporous
in the supply line
x
cold start
resistant
SYSTEM settings

Dialogs/Menus
Pipe Circumfer.
off >ON<
Fluid pressure
off >ON<
Meas. Point No.:
(1234) >(

)<
Transd. Distance
auto >USER<
Steam in inlet
off >ON<