Ferrari 458 Spider Owner'S Manual Download Page 61

Page: 61 / 260

Safety

If immersed in water or mud, it must be replaced.
• Pretensioners must be replaced at regular intervals as indicated in

the “Warranty Booklet”.

Important note

All work on any part of this safety system must be performed by

the

Ferrari Service Network

Warning

Removing or making modiﬁcations of any kind to the seat belts,

belt retractors and pretensioners is not allowed.
Maintenance work involving strong impacts, vibrations or

heating of the pretensioner area may activate them; vibrations

caused by road bumps will not have this effect.

Summary of Contents for 458 Spider





































































































































































































































































Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands

Ferrari 458 Spider, Owner'S Manual

Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands