Ferrari 458 Spider Owner'S Manual Download Page 155

Page: 155 / 260

155

About your Vehicle

Driving using the driving mode control switch
(“ Manettino”)

The driving mode control switch on the steering wheel allows the

driver to use the vehicle potential in a fast and intuitive way.
There are ﬁ ve modes available, which correspond to the grip

level (from low to high) and consequently to the level of driving

assistance required (from high to none).

WET mode

“WET” mode ensures stability on dry as well as on wet roads. It is

therefore recommended for low grip conditions (e.g. rain) and on

slippery or extremely uneven roads, but also to enhance comfort

during city driving. Suspension damping is optimised to provide

the best possible absorption (Level 1) and the ESC system is at its

maximum level; the standard Bosch ASR system is activated instead

of the F1-Trac function.

If “WET” mode is selected, it is indicated on the left TFT display as

shown below:

SPORT mode

The “SPORT” mode is the best setting for daily road use. This

mode is designed to ensure stability only in medium-high grip

conditions. Suspension damping shifts to Level 2 and gearshifting

is more racy. The ESC system also switches to a different level

offering you greater driving freedom.

If “SPORT” mode is selected, it is indicated on the left TFT display

as shown below:

Summary of Contents for 458 Spider





































































































































































































































































Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands

Ferrari 458 Spider, Owner'S Manual

Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands