Ferrari 458 Spider Owner'S Manual Download Page 14

Page: 14 / 260

General

Vehicle keys

The vehicle is delivered with two identical keys that can be used

for:
- central door locking;
- starting the vehicle;
- activating/deactivating the alarm system;
- opening the luggage compartment lid.

Important note

If the keys are lost or stolen, you can request a duplicate from

the

Ferrari Service Network

(see section “Duplicating the

keys” on page 16).

Key codes

CODE CARD

is supplied with the keys. This card shows the

following:
- the electronic code;
- the mechanical code for the keys, to be given to the

Ferrari

Service Network

if you request duplicates of the keys.

Warning

The code numbers on the

CODE CARD

must always be kept in

a safe and protected place, not accessible to others.

Important note

In the event of a change of ownership, it is essential that the

new vehicle owner is provided with all the keys and with the

CODE CARD

Summary of Contents for 458 Spider





































































































































































































































































Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands

Ferrari 458 Spider, Owner'S Manual

Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands