Ferrari 458 Spider Owner'S Manual Download Page 132

Page: 132 / 260

132

About your Vehicle

Lighting

The external lights and turn indicators only work when the ignition

key is in position

The external lights can be switched on and off manually or

automatically, depending on the ambient light.

Light switch

The switch

, on the dashboard to the left of the steering wheel,

can be set to ﬁve different positions:

Lights off

  Running and number plate lights on (*)
  Low beams on (*)
  Parking lights

AUT

Automatic operation of the external lights according to

ambient light.

(*) The relative warning light on the instrument panel comes on.

High beams

To turn on the high beams when the light switch

is set to

pull back lever

on the steering wheel.

When the high beams are on, the relative warning light

on the

instrument panel comes on.
Then push lever

towards the dashboard or pull it back to turn off

the high beams and turn on the low beams.

Flashing the headlights

The headlights can be ﬂashed by pushing the left-hand lever

towards the dashboard.
Flashing also occurs with lights off if the ignition key is set to

The high beams are used for ﬂashing.

Summary of Contents for 458 Spider





































































































































































































































































Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands

Ferrari 458 Spider, Owner'S Manual

Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands