Ferrari 458 Spider Owner'S Manual Download Page 181

Page: 181 / 260

181

About your Vehicle

Rear-view mirrors

Internal rear-view mirror

Hold the internal rear-view mirror and move it to the required

position.
On request, the internal rear-view mirror can be ﬁtted with an

electrochromic mirror that automatically darkens to reduce the

dazzling effect of the reﬂected light on the driver. The speed with

which the mirror darkens depends on the intensity of the light.
By pressing button

you can activate/deactivate the electrochromic

mode. When the electrochromic mode is activated, the green

LED

comes on.

Adjusting the steering wheel

The steering wheel can be adjusted for rake and reach.

Warning

Do not adjust the steering wheel when the vehicle is moving.

Mechanical adjustment

1) Unlock lever

by pushing it forward.

2) Adjust the position of the steering wheel.
3) Lock the steering wheel by pulling lever

until it locks into

place.

Electric adjustment (optional)

It can only be adjusted if the ignition key is in position

. Move

control

to the left of the steering column. On versions with a

driver's seat with memory, the position of the steering wheel is

memorised together with the position of the external rear-view

mirrors when the seat position is memorised.

Summary of Contents for 458 Spider





































































































































































































































































Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands

Ferrari 458 Spider, Owner'S Manual

Search results

Summary of Contents for 458 Spider

Reviews:

Related manuals for 458 Spider

Brands by name

Popular brands