Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 74 / 162

BlackDiamond 10K System Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
74
5 Insert the remaining screws.
6 Tighten all six screws securely.
Ensure that the screws do not protrude from the cable manager base so that the cable guides fit
properly on the base.
7 Replace the cable guides onto the mounting base and secure the six screws as shown in Figure 35 .
Do not overtighten the screws.
Figure 35: Securing the cable guides onto the mounted cable manager base
8
Using the cable guides and cable clips (provided), slide the cables through the clips, holders, and
channel to manage the cables installed on your BlackDiamond 10K series switch chassis, as shown in
Figure 36 .
EX_077