Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 107 / 162

Extreme Networks Consolidated XOS Hardware Installation Guide
107
9 Aspen 8810 Chassis
This chapter describes:
●
Aspen 8810 Chassis Architecture on page 107
●
Uncrating and Unpacking the Aspen 8810 Chassis on page 109
●
Pre-Installation Requirements
●
Assembling the Aspen 8810 Mid-Mount Kit
●
Rack Mounting the Aspen 8810 Chassis
●
Re-crating and Re-packing the Aspen 8810 Chassis on page 114
Aspen 8810 Chassis Architecture
This section describes and shows the architecture of the Aspen 8810 chassis:
●
Aspen 8810 Chassis Front View on page 107
●
Aspen 8810 Chassis Rear View on page 108
Aspen 8810 Chassis Front View
The Aspen 8810 chassis consists of the following components:
●
One 10-slot chassis with backplane
●
Eight dedicated I/O module slots (labeled 1 through 4 and 7 through 10)
●
Two dual use I/O module/MSM slots (labeled 5/A and 6/B; at least one of the dual use slots must
contain an MSM)
●
Up to six power supplies (accessed from the front of the unit)
●
One fan tray (accessed from the front right of the unit)
●
One ESD-preventive wrist strap connector
When two MSMs are installed, the chassis can support up to 48 Gig per slot.