Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 72 / 162

BlackDiamond 10K System Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
72
Installing the BlackDiamond Cable Manager
You need the following tools and equipment to install the cable manager:
●
#2 Phillips-head screwdriver
●
Cable manager
The BlackDiamond cable manager ships assembled in three parts; a cover plate, the cable guides, and
the mounting base, as shown in
Figure 32 .
Figure 32: Cable manager components
You must remove the cover plate and the six screws from the cable guides before you can mount the
cable manager base onto the rack.
To install the cable manager:
1 Press down on the latches at the top of the cover plate to remove the cover plate.
Removing the cover plate exposes the six screws holding the cable guides onto the mounting base,
as shown in
Figure 33 .
EX_079
Cable manager cover
Cable manager base
Cable guides
Three screw attachments
each side