Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 112 / 162

Aspen 8810 Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
112
NOTE
Save all packaging, bolts, washers, clip locks, and box for future use in the event that the chassis needs to be
moved to another location or returned to Extreme Networks.
Pre-Installation Requirements
The following tools and equipment are required for assembling the Aspen 8810 mid-mount kit and
racking the Aspen 8810 chassis:
●
ESD-preventive wrist strap
●
#2 Phillips screwdriver
●
19” helper bracket
●
Aspen 8810 mid-mount kit
●
Aspen 8810 chassis
●
A minimum of two people to help install the chassis into the rack
Assembling the Aspen 8810 Mid-Mount Kit
Follow these steps to assemble the Aspen 8810 mid-mount kit:
1 Using 2 or more people, place the empty chassis in an upright position on a secure flat surface.
2 Attach the right and left mid-mount bracket to each corresponding side of the chassis using eight
mount screws as shown in
Figure 56 .
Figure 56: Right and left mid-mount brackets attached to the Aspen chassis
ASP034
Mid-Mount
Bracket