Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 114 / 162

Aspen 8810 Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
114
Re-crating and Re-packing the Aspen 8810 Chassis
Follow these steps to ensure proper re-crating and re-packing for the Aspen 8810 chassis:
1 Mount the 19” helper bracket into the system rack using four mount screws
2 Loosen the eight mount screws holding the chassis from the system rack using a #2 Phillips
screwdriver.
3 Using two people, place one hand in the empty power supply bay and the other hand in the rear
slot on the back panel of the chassis.
4 Slowly guide the chassis out from the system rack using the 19” helper bracket.
5 Gently lift the chassis off from the 19” helper bracket onto wood pallet as shown in Figure 58 .
Figure 58: Correct method for lifting the Aspen chassis
ASP017A