Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 69 / 162

Installing the Chassis
Extreme Networks Consolidated XOS Hardware Installation Guide
69
Figure 28: Lifting the switch from the pallet
6 Place the back of empty chassis on the helper bracket in the equipment rack. Using the higher, front
handles slowly guide the chassis into the rack until it is securely seated.
7
While holding the empty chassis, secure the chassis to the rack, as shown in Figure 29 .
Figure 29: The BlackDiamond 10K series switch chassis requires eight screws to be securely
mounted in a rack
8 After you secure the chassis, remove the helper bracket.
Store the bracket for future use; for example, if you need to remove the chassis.
EX_090
EX_009