Extreme Networks BlackDiamond 8810, Hardware Installation Manual

Page: 150 / 162

Safety Information
Extreme Networks Consolidated XOS Hardware Installation Guide
150
Power Supply Units (PSUs)
Ensure that the following requirements are met with Extreme Networks 700/1200 W AC PSU(s):
●
Disconnect all power before removing the back panel of any Extreme Networks switch.
●
The unit must be grounded. Do not connect the power supply unit to an AC outlet without a ground
connection.
●
The unit must be connected to a grounded outlet to comply with European safety standards.
WARNING!
Ensure that the source outlet is properly grounded before plugging the AC power cord into Extreme Networks 700/
1200 W AC PSU.
WARNING!
Ensure that the source outlet is properly grounded before plugging the AC power cord into Extreme Networks
700/1200 W AC PSU.
WARNING!
Each 700/1200 W AC PSU requires a dedicated circuit breaker of 15A minimum, 20A maximum.
NOTE
When using more than one 700/1200 W AC PSU, make sure that each 700/1200 W AC PSU attaches to an
independent power source.
CAUTION
Install equipment into the lower half of the rack first to avoid making the rack top-heavy.