I/O Modules
Extreme Networks Consolidated XOS Hardware Installation Guide
123
NOTE
For more information about the supported mini-GBIC types and specifications, see
“Mini-GBIC Type and Hardware/
Software Support” on page 40
.
G24X LEDs
The G24X module has the following LEDs:
●
Module status
●
Module diagnostics
●
Port status
For information about the LEDs and their activity on the G24X module, see
“I/O Module LEDs” on
page 126
.
10G4X Module
Figure 65
shows the 10G4X module.
Figure 65: 10G4X module
The 10G4X module has four unpopulated XENPAK-based 10 Gigabit Ethernet ports.
The default configuration of the 10G4X module is as follows:
All ports:
●
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
Module status LEDs
10 Gbs ports
ASP040
Summary of Contents for BlackDiamond 8810
