Evidence Cross-8/HPoE-10G, User Manual

Page: 92 / 321

5-3 VLAN Port Status
The function Port Status gathers the information of all VLAN status and reports it by the order
of Combined, Admin, NAS, GVRP, MVR, Voice VLAN, MSTP, DMS, VCL.
Web Interface
To Display VLAN Port Status in the web interface:
1. Click VLAN Management and VLAN Port Status.
2. Specify the Combined, Admin, NAS, GVRP, MVR, Voice VLAN, MSTP, DMS, VCL, RMirror.
3. Display Port Status information.
Figure 5-3: The VLAN Port Status
Parameter description:

VLAN USER :
VLAN User module uses services of the VLAN management functionality to configure VLAN
memberships and VLAN port configuration such as PVID, UVID. Currently we support
following VLAN User types:
NAS : NAS provides port-based authentication, which involves communications between a
Supplicant, Authenticator, and an Authentication Server.
GVRP : Adjacent VLAN-aware devices can exchange VLAN information with each other by
using Generic VLAN Registration Protocol (GVRP). GVRP is based on the Generic Attribute
Registration Protocol (GARP) and propagates VLAN information throughout a bridged
network.
MVR : MVR is used to eliminate the need to duplicate multicast traffic for subscribers in
each VLAN. Multicast traffic for all channels is sent only on a single (multicast) VLAN.
Voice VLAN : Voice VLAN is a VLAN configured specially for voice traffic typically
originating from IP phones.
MSTP : The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple
spanning trees in a network, which significantly improves network resource utilization while
maintaining a loop-free environment.
DMS: Shows DMS VLAN membership status.
VCL : shows MAC-based VLAN entries configured by various MAC-based VLAN users.

Port :
The logical port for the settings contained in the same row.

Port Type :