Evidence Cross-8/HPoE-10G, User Manual

Page: 71 / 321

3-6.2 Status
This section displays the loop protection port status the ports of the currently selected switch.
Web Interface
To display the Loop Protection status in the web interface:
1. Click Port Management, Loop Protection and Status.
2. If you want to auto-refresh the information then you need to evoke the “Auto refresh”.
3. Click “Refresh” to refresh the Loop Protection Status.
Figure 3-6.2: Loop Protection Status
Parameter description:

Port
The switch port number of the logical port.

Action
The currently configured port action.

Transmit
The currently configured port transmit mode.

Loops
The number of loops detected on this port.

Status
The current loop protection status of the port.

Loop
Whether a loop is currently detected on the port.

Time of Last Loop
The time of the last loop event detected.
Buttons
Figure 3-6.2: Loop Protection Status buttons

Auto-refresh :