Evidence Cross-8/HPoE-10G, User Manual

Page: 184 / 321

5. If you want to cancel the setting then you need to click the Reset button. It will revert to
previously saved values.
6. Click “Refresh” to refresh an entry of the MLD Snooping Group Information.
7. Click First Entry/Next Entry to change Entry.
Figure 9-4.2: The IPMC Profile Address Configuration
Parameter description:

Entry Name :
The name used for indexing the address entry table.
Each entry has the unique name which is composed of at maximum 16 alphabetic and
numeric characters.

Start Address :
The starting IPv4/IPv6 Multicast Group Address that will be used as an address range.

End Address :
The ending IPv4/IPv6 Multicast Group Address that will be used as an address range.
Buttons

Add New Address (Range) Entry :
Click to add new address range. Specify the name and configure the addresses. Click
"Apply"

Delete :
Check to delete the entry.
The designated entry will be deleted during the next save.

Apply :
Click to save changes.

Reset :
Click to undo any changes made locally and revert to previously saved values.

First Entry :